Yesterday my friend received a coffee machine from the Indonesian Ministry of Industry. I saw the elegant design and color that made me interested in reviewing it. Here is a brief review of the Mayaka Coffee Maker CMS013B coffee machine
This machine is of the Mayaka brand and is type CMS013B-GS Black. The Mayaka Coffee Maker CMS013B has three functions: to make espresso coffee, cappuccino coffee, and steam milk.The features of the Mayaka CMS013B are a 15-bar strong pressure pump, a 1.25-liter water tank, a thermometer to show the temperature, a removable and adjustable drip tray, and a high-pressure foam function to make a lathe.
The specifications of the Mayaka Coffee Maker CMS013B Coffee Machine are as follows `1. The required voltage is 220-240 Volts, 50 Hz frequency, 1100 Watt power or equivalent to 6 Ampere, if your electricity in your home has not reached 6 Ampere then your electricity may not be strong enough, so the author recommends that you use 10 Ampere electricity, considering that your household electricity needs 10 Ampere. You need it for washing machines, magic comps, refrigerators, and so on. for bar pressure reaching 15 bar.
How to install a Mayaka coffee portafilter
1. Make sure the portafilter lip fits and fits the filter container.
2. Turn the portafilter to the right and left until the filter is locked properly in the container.
Here are the steps to take first when using a Mayaka coffee machine
1. Pull out the coffee maker’s water. Pour water into the water tank, the water level should not exceed the “MAX” mark on the tank.
2. Install the coffee portafilter into the metal funnel, then install the metal funnel under the metal funnel, and turn counterclockwise until it is tightly attached.
3. Place a cup of espresso that you have prepared on the drip plate. Make sure the steam knob is in the “O” position.
4. Connect to the power source, and press the On/OFF button to turn on the machine, the power indicator (red) will light up.
5. Press the pump control button, then the pump will pump water out, when the water comes out, press the pump control button again to close the water flow.
6. Make sure the coffee/steam button is in a higher position and wait a moment, the device starts to heat up until the coffee indicator lights up, which means that the preheating is complete.
7. Press the pump control button again, and water will flow out.
8. After the water has been flowing for approximately 01 minutes, press the pump control button.
How to Make Cappuccino Coffee with Mayaka Coffee Maker CMS013B
1. Prepare espresso first with a large enough container according to the “Make Espresso Coffee” section, and make sure the steam knob is in the “O” position
2. Press the coffee/steam button to the bottom position, and wait until the steam indicator (yellow) lights up
3. Fill the jug with about 100 grams of milk for each cappuccino prepared, it is recommended to use milk at refrigerator temperature (not hot).
4. To get good milk foam performance, it is recommended to keep the steam knob in the open position for about 15 seconds. Because the initial steam contains too much water, then keep the knob in the “O” position and do the next steps.
5. Insert the steam wand into the milk about two centimeters, then turn the steam knob slowly counterclockwise, steam will come out of the steam wand. Foamed milk is produced by moving the vessel from top to bottom. 6. When the desired goal is achieved, you can turn the steam knob to the “O” position
7. Please follow the operation below to avoid the steam channel being blocked after you finish defecating.
With every purchase you get a warranty card from Mayaka, where in the warranty card there are written provisions that can cause the warranty card to be void, the warranty card is valid for 1 year from the date of purchase. That is mayaka coffee maker CMS013B review, you can search for other queries by typing keyword in the search bar.
